Software Break-Even: A Sum With Your Own Numbers

Published
November 18, 2026
Reading
9 min read
Share
In This Piece
  1. The Short Version
  2. The Sum Needs No Claim From Anyone
  3. What the Tool Really Costs Each Month
  4. What an Hour Costs You
  5. Spread the Line Across Your Clients
  6. An Hour Back Isn't Money Yet
  7. Test the Line With a Stopwatch
  8. Where GoMimic Fits
  9. Questions People Ask

Every software page has a claim about hours saved. Most agency owners read it the way they'd read a horoscope: pleasant, possibly true of somebody, and no basis for spending money.

We think that's the right reaction. It's also why we'd turn the question around. Software break even is a sum you can do with no vendor's claim in it at all: how many hours does this tool have to give back each month to pay for itself? Once you have that number, you have something you can test on real work.

We make one of these tools, so we'd rather give you the sum than ask you to believe us.

The Short Version

  • Break-even hours = everything the tool costs in a month ÷ what an hour costs you.
  • Count the whole cost: add-ons, setup time, and any tool it lets you drop.
  • Use what an hour costs you, based on the hours people really work.
  • Divide by clients to see how little each one has to give back.
  • Only some freed hours turn into money. Count those, and call the rest what they are.
  • Test on real posts during a trial, and compare what you measure to your line.

The Sum Needs No Claim From Anyone

Break-even hours are the hours a tool must give back each month to cover what it costs. There are two boxes to fill, and both numbers are yours.

The sum drawn with empty boxes: everything the tool costs in a month, divided by what an hour costs you, equals the hours it must give back. A red-pen note says there is no vendor's number in this sum.
We've left the boxes empty. The next two sections fill them.

Notice what's missing: anyone's estimate of what you'd save. The vendor only has to tell you the price, and everything after that is a question about your own work.

The result is usually smaller than people expect, and that can mislead. A low number means the tool has a low bar to clear. It doesn't mean it clears it, and we come back to that below.

What the Tool Really Costs Each Month

The subscription is only the first line. Write out the rest like a receipt.

A receipt for a made-up tool. Subscription: 500 dollars. One add-on seat: 50 dollars. Setup, 12 hours at 50 dollars an hour, spread over 12 months: 50 dollars. Old tool you drop: less 100 dollars. Total: 500 dollars a month. A red-pen note says this tool is made up, and so is its price.
A made-up tool, with made-up prices. It isn't ours, and it isn't anyone else's either.

Seats and add-ons. Who needs a login? Does the plan cover your clients, or does the cost climb with each one? Read the pricing page with your real roster in mind, including the roster you expect next year.

Setup time. Moving client material in and showing the team how it works takes hours, and hours cost money. Multiply them by your hourly cost and spread them across a year.

What you can drop. If this tool lets you cancel another, take that price off. Only count it if you'll really cancel. "We could probably get rid of that" doesn't belong on the receipt.

What an Hour Costs You

This is the box people get wrong, usually in one of two directions. They use the hourly wage alone, which is too low. Or they use their billing rate, which answers a different question.

Start with the person whose hours will change. Take their pay for the year, add what comes on top from your own payroll, such as taxes, insurance, and retirement, then divide by the hours they really work. A year has 2,080 paid hours at 40 a week. Take out holidays, vacation, and sick days to get hours worked.

For a made-up editor: pay of 70,000 dollars, 20,000 on top, and 1,800 hours worked comes to 90,000 ÷ 1,800, or 50 dollars an hour.

If you're missing a number, there are public ones to check yours against:

Your own payroll beats both. Use these only until you've looked.

With the made-up receipt above: 500 dollars ÷ 50 dollars an hour = 10 hours a month. That's the tool's line.

Spread the Line Across Your Clients

Ten hours a month sounds like plenty, until you ask where it would come from. So divide it by your roster.

A made-up line of 10 hours a month, shared across clients. With 5 clients, each has to give back 2 hours a month. With 10 clients, 1 hour. With 20 clients, 30 minutes. A red-pen note says the same line, shared by more clients.
Made-up numbers again. Divide your own line by your own roster.

"Two hours a client each month" is something you can picture. You could ask an account lead whether that's realistic and get a real answer, which is harder to do with a total.

The shape of the price matters here too. With a flat price, the share falls as you add clients. With a per-client price, each new client brings its own cost, so the share per client stays about where it was. We've compared the two in flat fee vs. per-client pricing.

An Hour Back Isn't Money Yet

Here's where most ROI sums fall apart. A freed hour only pays for the tool if it goes somewhere that changes your books.

One freed hour can go three ways. Sold to a client as paid work: it counts. Less freelance spend or overtime: it counts. Absorbed by the week: it doesn't count toward the sum, though it's still real. A red-pen note says name where it goes before you count it.
The third path isn't worthless. It just won't pay an invoice.

Sold. The hour goes to work a client pays for, such as more strategy or a new service line. You need someone to buy it, so ask whether you could sell that hour today.

Spent less. You use fewer freelancers, or stop paying overtime. This is the easiest to prove, because the money shows up in a lower bill.

Absorbed. The week closes over the hour. People chase less, log off on time, and aren't quite so stretched. That's worth a lot, and it can be the real reason to buy a tool, but it doesn't belong in a break-even sum. Buy it for that reason if you like, and say so.

Cutting staff is the other way to make the sum work, and it's usually a poor reading of it. If the hour you get back is a senior editor's, the better question is what they should be doing instead of cleaning drafts.

The same goes for retainers. If you've already found hours leaking out of a retainer, those are a good place to look, since every one you recover goes straight to margin.

Test the Line With a Stopwatch

Now you have a number to beat, and a trial is the place to try it. A trial usually covers less than a month, so measure per post rather than per month.

  1. Choose one client and one kind of work. Pick something typical, and leave out your easiest client.
  2. Time it the old way first. Do a few real posts, from opening the source to something you'd send for approval. Add the chasing and the hand-off. Our Learn page on manual distribution lists the stops to time.
  3. Time the same stops in the tool. Use real work, and include the editing. A draft that's quick to make and slow to fix hasn't saved anything.
  4. Multiply up. Take the difference per post, times your posts each month.
  5. Compare it to your line. Count only the hours you've named a place for.
A ruler of hours a month, with the made-up break-even line at 10 and twice the line at 20. Three made-up tools are marked. Tool A measured 6 hours: below the line, so no. Tool B measured 13 hours: past the line, but too close to call. Tool C measured 24 hours: clear of it.
Three made-up results. The twice-the-line mark is our opinion, and it's explained below.

In our view, a tool should clear about twice its line in a test before you trust it. That's a rule of thumb and not a measurement. We pick it because a trial tends to flatter a tool: the team is paying attention, you chose the work, and the first weeks skip whatever goes wrong later. A tool that only just clears the line in those conditions may not clear it in an ordinary month.

Calculators on vendor pages deserve the same care, ours included. They open with someone's idea of typical numbers. Replace every one of them with your own before you believe the answer.

Break-Even Hours

Work out what a tool has to give back before you ask what it saves, then measure that.

the part about us

Where GoMimic Fits

Create client content. Get it approved. Deliver it. We make GoMimic, the Connected Content System for Client Work, so weigh this accordingly.

Our pricing page has a calculator called the Hidden Bill. You put in your clients, posts, formats, minutes, and hourly cost, and it shows what that work costs by hand and how many hours each plan would have to save to cover its price. Its opening numbers are only a starting point, so tap each one and enter yours.

We won't tell you how many hours you'd get back, because we don't know your month. The price is flat per account, not per client, and Pro holds 15 clients and 3 users, while Agency holds 30 clients and 10 users, so check the plan against your roster before dividing. Every plan includes a monthly allowance of long-form pieces and of short pieces (assets), shared across all your clients. The pricing page has the numbers. Need more articles, assets, clients, users, or a different mix of features? Build a Custom plan around the work you do. There's a 14-day free trial with no credit card, which is long enough to run the stopwatch test on real posts. Results shows what your team did and how each client replied, which helps when you're looking back at the trial.

Where it falls short: it won't suit every kind of work on your list. It creates from what you give it, and a blog post or bylined article only from your client's own take. It won't pick a topic or plan your content strategy for you. And GoMimic never posts. If most of your hours sit in those places, the sum may not work out, and you should believe the sum.

Questions People Ask

How do you work out software break even?

Divide everything the tool costs in a month by what an hour costs you. The result is the number of hours it has to give back each month to pay for itself. Then measure, on real work, whether it does.

What hourly rate should I use for software ROI?

Use what the hour costs you: pay plus taxes and benefits, divided by the hours that person really works. Your billing rate only applies to hours you could sell.

What should I include in the cost of the tool?

The subscription, add-on seats, and setup hours spread over a year, less the price of any tool you'll cancel. Check how the price changes as your roster grows.

Do saved hours count if nobody bills for them?

Not toward break even, unless they cut a cost such as freelance spend or overtime. Hours the week absorbs can still be worth having, and that can be a fair reason to buy. Just don't count them as money.

How long should I test a new tool?

Long enough to run real posts for one typical client through the whole job, including edits and approval. Time the same stops the old way first, and work out the difference per post so a short trial can still answer the question.

Why not trust the ROI calculator on a vendor's site?

You can use one, as long as you replace its opening numbers with your own. It still can't tell you how many hours you'd get back, so you'll need your own timing for that.

GoMimic

Written by the GoMimic team

GoMimic helps you create client content, get it approved, and deliver it, in each client’s voice.

Why It Works

Your Client's Yes Should Be This Easy to Find.

Start Free TrialFree for 14 daysNo credit card required

See Why It Works

Approved