Unbilled Revisions: Finding the Retainer Margin Bleed
- Published
- November 17, 2026
- Reading
- 9 min read
- Share
In This Piece
The client pays on time. They're happy, and they renewed in the spring. Then someone asks why that account always feels tight, and nobody has a short answer.
Often the answer is unbilled revisions: hours that went into the account and never appeared on an invoice. A fixed fee hides them well, because the money coming in doesn't change when the work does. The revenue line looks the same in a good month and a bad one.
We call this the Retainer Margin Bleed. Below is the sum for it, and a way to find out where your own hours are going. All you need is one client and four weeks.
The Short Version
- The Retainer Margin Bleed is the gap between the hourly rate you priced into a retainer and the rate you end up earning once the unbilled hours are counted.
- The sum: monthly fee divided by hours you sold plus hours you didn't. Run it for one client first.
- Sort the unbilled hours by where they came from. Some are the client's, and some are yours.
- A tighter contract only reaches the client's share. Your own repair work needs a different fix.
- Some unbilled work is a fair gift. Decide on it, write it down, and mention it at renewal.
The Sum for Your Real Hourly Rate
Realized hourly rate = monthly fee ÷ (hours you sold + unbilled hours).
Here's a made-up retainer. The fee is 5,000 dollars a month for 40 hours of work, so the rate you priced is 125 dollars an hour. Log the month properly and you find 54 hours went in. The fee hasn't moved, and the rate has dropped to about 93 dollars.
The margin moves further than the rate does. If an hour costs you 60 dollars, again made up, the 40 hours you sold cost 2,400 dollars and leave 2,600, a margin of 52%. The 54 hours you worked cost 3,240 dollars and leave 1,760, a margin of about 35%.
| Made-up month | As priced | As worked |
|---|---|---|
| Fee | 5,000 dollars | 5,000 dollars |
| Hours | 40 | 54 |
| Rate earned | 125 dollars | About 93 dollars |
| Cost of the hours | 2,400 dollars | 3,240 dollars |
| Margin | 52% | About 35% |
Use what an hour costs you here, including taxes and benefits. If you don't have that number yet, our break-even piece walks through it.
How Common This Is, and How Far to Trust the Figure
The best-known figure comes from Ignition, which surveyed 273 managers and executives at US agencies. It reports that 57% of agencies lose from 1,000 to 5,000 dollars every month on unbilled work, and that 30% say scope creep costs them more than 5,000 dollars a month. It also says 78% rarely or only sometimes charge for out-of-scope work (published May 22, 2025, and checked on November 5, 2026).
Three things to keep in mind if you quote it. Ignition sells proposal and billing software, so it has an interest in the answer. The figure is a monthly loss for the agency, and it isn't per client. And it covers all unbilled work, of which revisions are only a part.
So we'd treat it as a reason to go and count, and leave it out of your own sums.
Log One Client for Four Weeks
Pick the retainer that feels tightest. For four weeks, everyone who touches it notes the time and a reason, in whatever you already use. You don't need new software for this. A shared sheet is enough, and it only has to be roughly right.
Log every hour, then mark the ones beyond what the retainer covers. Most people leave out two kinds: the 15 minutes spent finding last month's feedback, and the repair an editor does before the client ever sees a draft. Add those.
We'd also keep this separate from what it costs to make formats by hand. That page works out the full bill for the work, and this one asks only about the hours your fee never covered.
Four Piles, and Who Each One Belongs To
Every unbilled hour lands in one of four piles. It's worth sorting them, because each one has a different fix and a different owner.
The client asked for more. A new angle, an extra version, one more round after the agreed rounds. This is scope creep in the plain sense. Your contract and how you reply are the fix.
A late approver. The marketing lead said yes, then the founder read it on Friday, and the post went back to the start. Name the people who sign off before the first round. We've written about when a client needs a second approver.
Your own repair. A draft came in sounding like nobody, or got a fact wrong, and a senior person rewrote it before anyone outside saw it. The client didn't ask for that and can't be billed for it. The fix is better material before the draft, and we've written about why client content goes generic. If this pile is your biggest, read what happens when senior editors end up cleaning drafts.
Extra formats. One client got five versions of each post during a good month, and now everyone does. Nobody agreed to that. Ask which formats that client really uses, then cut the rest or price them. It's the same question you'd ask when pricing distribution as a service.
Agencies tend to reach for the contract first, because a stricter clause feels like taking charge. In our made-up month, the contract reaches 7 of the 14 hours at best. The rest never had anything to do with the client.
What to Say When the Client Asks for More
Most clients don't know where the line is. They asked for one small thing, in good faith, and nobody said it was extra. So tell them, at the moment they ask, and give them a choice.
A few things make that reply easier to send:
- Say what's included in plain numbers. How many posts, which formats, how many rounds of changes, and who signs off.
- Define a round. One set of changes, gathered and sent together. Three people's notes over three days are three rounds unless they've agreed to send them as one.
- Separate a fix from new work. If you got a fact wrong, that's on you, and you fix it for free. A new angle after approval is new work. We cover the rest in what to do when a client asks for changes.
- Keep the record. When there's a question about what was agreed, it helps to be able to show what was sent and what came back.
Clients rarely mind this as much as agencies fear. A reply that offers a choice reads like someone managing the account well.
Decide Which Hours Are a Gift
You shouldn't bill for everything. Sometimes a client has a bad week, and you pick up an hour because you'd like to keep working with them. That's good business, and it's your call.
The trouble comes when nobody chose it. So give goodwill a line of its own on the month-end page. Writing it off on purpose is different from losing it without noticing, and it gives you something to say at renewal: "We put in three extra hours in March when your launch moved. We were glad to."
Then use the page. Any pile that keeps growing gets one change next month, one pile at a time, and you log again to see whether it moved. If a client's requests have really grown, the renewal is your chance to change the retainer so it covers them. You'll have months of notes to go on, which makes it a much easier talk than one based on a feeling.
This page isn't the return you report to the client. It's your own margin, and it belongs in your books. For how this fits the rest of the job, see the content creation process for client work.
The Retainer Margin Bleed
The fee stays put while the hours grow, so the rate you earn falls and no invoice shows it.
Where GoMimic Fits
Create client content. Get it approved. Deliver it. We make GoMimic, the Connected Content System for Client Work, so weigh this accordingly.
It helps with the piles that come from how the work moves. Posts are written with the rules and facts you keep for that client, so your team starts from what you already know about them. Posts go out in numbered rounds, and the client answers post by post. The approval record keeps who said what, which helps when someone asks what was agreed. When a client's comment should hold for good, Keep This for Next Time makes it a rule, so the same note doesn't come back.
Where it falls short: GoMimic isn't a billing tool. It won't tell you what's in scope, or say the awkward thing to a client for you. Your team still reads every post, and we don't claim a number for hours you'd get back. Our pricing page has a sum for what a plan would have to save, and you can test it against your own log.
Put real client work to the test.
Questions People Ask
What are unbilled revisions?+
Unbilled revisions are changes to client work that take time and never appear on an invoice. They include extra rounds a client asks for, changes after a late approver reads the work, and repairs your own team makes before the client sees a draft.
How do you calculate unbilled revision costs?+
Log one client's hours for four weeks, then mark those beyond what the retainer covers. Divide the monthly fee by all the hours worked to get the rate you really earned, and multiply the extra hours by what an hour costs you to get the cost.
Why do content retainers lose profitability when the fee looks fine?+
A fixed fee doesn't change when the work grows, so the revenue line looks the same in a good month and a bad one. The loss shows up as a lower rate per hour worked, and only a log of those hours will show it.
How common is unbilled work at agencies?+
Ignition's survey of 273 managers and executives at US agencies reports that 57% lose from 1,000 to 5,000 dollars a month on unbilled work, and 30% say scope creep costs them more. Ignition sells billing software, and the figure covers the whole agency, so your own log is a better guide.
Should you bill for every extra hour?+
No. Some extra hours are goodwill you're glad to give. Write them down as a choice, so you know what you gave, and the client can hear about it at renewal. The hours worth stopping are the ones nobody decided on.
How many revision rounds should a retainer include?+
We don't have a right number, because it depends on the client and the work. What matters most is that the contract states a number and says what one round is. Then both sides can tell when something falls outside it.
Written by the GoMimic team
GoMimic helps you create client content, get it approved, and deliver it, in each client’s voice.
Why It WorksMore from GoMimic
Software Break-Even: A Sum With Your Own Numbers
Software break even, worked out with your own numbers: what the tool really costs, what an hour costs you, and how to test the hours on real work.
Content Distribution as a Service: How to Package and Price It
Pricing a content distribution service starts with the scope. What to include, three ways to charge, and add-on services that are easy to explain to a client.